Skip to content
Altamonte Springs · Seminole County
GFCI & Outdoor Outlets

GFCI & Outdoor Outlets in Altamonte Springs

ZIP codes
3270132714

Lanai and patio outlets, weather-resistant GFCIs, in-use covers, nuisance tripping.

About this service in Altamonte Springs

New outdoor outlets for lanais, patios and outdoor kitchens, weather-resistant GFCI outlets, in-use covers, garage outlets, and GFCIs that trip in wet weather. We’ll connect you with an independent electrical contractor.

Older Altamonte Springs homes often lack GFCI protection in kitchens, bathrooms, garages and outdoors, since many were wired before those rules expanded. Adding GFCIs and weather-resistant exterior outlets with in-use covers is a common, inexpensive update, and often comes up when a home is inspected for sale or insurance.

Permits

In Altamonte Springs city limits, permits go through City of Altamonte Springs building department. Outside city limits, through Seminole County Building Division (Building Permits Online). The contractor normally pulls the permit.

Outdoor GFCI outlet with weatherproof in-use cover on a patio wall
At a glance

Altamonte Springs

County
Seminole County
ZIP codes
3270132714
Permits inside city limits
City of Altamonte Springs building department
Permits outside city limits
Seminole County Building Division (Building Permits Online)

Signs and situations

GFCI protection

A GFCI cuts power when current leaks to ground, protecting people around water.

Weather-resistant devices

WR-rated outlets and in-use (bubble) covers keep water out even with a cord plugged in.

Outdoor kitchens and lanais

Grills, fridges and fans outside need properly protected circuits.

Nuisance tripping

A GFCI that trips after rain usually points to moisture in a box or fixture.

Call about GFCI & Outdoor Outlets

Before you hire

  • Ask for the Florida license number and check it on the DBPR license search
  • Ask whether a permit is needed and get the permit number
  • Get the estimate in writing, including what's not included
  • Make sure the final inspection passes and the permit is closed

Frequently asked questions

Most likely water is getting into an outlet, a fixture, a cover or a cable somewhere on that circuit. One GFCI can protect several outlets further down the line, including some you may not expect. Don’t replace the GFCI with a standard outlet; find and fix the moisture. Weather-resistant outlets with in-use covers prevent most of these problems.

Still have a question? Call (844) 578-0475

Call for electrical help

ZIP codes
3270132714
Call (844) 578-0475