Aluminum Wiring Evaluation in Kissimmee
Evaluation and CPSC-recognized repair options for 1965–1973 aluminum branch wiring.
About this service in Kissimmee
Some homes built or modified between 1965 and 1973 have aluminum branch-circuit wiring. If an inspector or insurer flagged it, or you’re not sure, we’ll connect you with an independent electrical contractor who can evaluate it and explain the options.
Most Kissimmee homes were built well after 1973, so aluminum branch wiring is unlikely in the newer subdivisions. It’s worth checking in homes built, or added onto, between 1965 and 1973, mostly in the older parts of town. If a 4-point inspector noted ‘single-strand aluminum’, ask your insurer which repairs they accept before getting an estimate, since some accept COPALUM or AlumiConn repairs and others require rewiring.
Permits
In Kissimmee city limits, permits go through City of Kissimmee Permit & Inspection Services. Outside city limits, through Osceola County Permit Center. The contractor normally pulls the permit.

Kissimmee
- County
- Osceola County
- ZIP codes
- 34741347433474434746347473475834759
- Permits inside city limits
- City of Kissimmee Permit & Inspection Services
- Permits outside city limits
- Osceola County Permit Center
Signs and situations
Which homes may have it
The U.S. Consumer Product Safety Commission says homes built, or circuits added, between 1965 and 1973 may have aluminum wiring. Homes built before 1965 are unlikely to.
Why it matters
CPSC research found aluminum-wired homes far more likely than copper-wired homes to have connections reach fire-hazard conditions. The risk is at the connections.
Service wiring is different
Large aluminum service and feeder conductors are common and acceptable when properly installed. The concern is small branch circuits.
Insurance
Many Florida insurers ask about single-strand aluminum branch wiring on 4-point inspections.
Call about Aluminum Wiring Evaluation
| Approach | What it is | CPSC view |
|---|---|---|
| Rewire with copper | Replace aluminum branch circuits | Permanent repair |
| COPALUM crimp | Copper pigtail crimped with a special tool | Permanent repair (CPSC-recommended method) |
| AlumiConn connector | Set-screw connector for copper pigtails | Acceptable alternative |
| CO/ALR devices | Aluminum-rated outlets and switches | Incomplete repair at best |
Before you hire
- Ask for the Florida license number and check it on the DBPR license search
- Ask whether a permit is needed and get the permit number
- Get the estimate in writing, including what's not included
- Make sure the final inspection passes and the permit is closed
Aluminum Wiring Evaluation in nearby areas
Frequently asked questions
Look at cable jackets visible in the attic, the garage or near the panel for ‘AL’ or ‘ALUMINUM’. The bare wire may look silver rather than copper colored. Homes built, or circuits added, between 1965 and 1973 are the main candidates. Don’t remove outlet covers or handle wiring yourself: an electrician can confirm it safely, and an insurance inspector may already have noted it on a 4-point report.
Not automatically. CPSC research points to the connections: where aluminum wire meets outlets, switches and splices, it can loosen and overheat over time. Warning signs include warm cover plates, flickering lights, a burning smell, or outlets and lights that stop working. An evaluation checks the connections and explains the repair options.
It depends on the insurer. Some accept a documented repair of every connection with COPALUM crimps or AlumiConn connectors; others require rewiring with copper. Ask which methods they accept and what documentation they need, such as a closed permit or a contractor’s letter, before the work starts.
Inside Kissimmee city limits: City of Kissimmee Permit & Inspection Services. In unincorporated Osceola County: Osceola County Permit Center. A Kissimmee mailing address doesn’t always mean you’re inside city limits.
Still have a question? Call (844) 578-0475
Related services
Rewiring, Circuits & Additions
Remodel wiring, dedicated circuits, workshops, additions and older-home updates.
Learn more →
Panel Replacement & Service Upgrades
Outdated panels, 4-point inspection items, more capacity for EVs, pools and additions.
Learn more →
Electrical Repair & Diagnostics
Tripping breakers, dead outlets, flickering lights, partial power loss, fixture problems.
Learn more →
Orlando electrical permits: what homeowners should knowWhich office issues your permit, what usually needs one, and how to check it.
How to verify a Florida electrical contractor licenseCertified (EC) vs registered (ER) licenses and how to look one up.
Lightning, power surges and electrical protection in Central FloridaHow surges reach your home, what protects it, and what to do after a strike.
Audubon Park
Conway
Altamonte Springs
Casselberry