Skip to content
Kissimmee · Osceola County
Aluminum Wiring Evaluation

Aluminum Wiring Evaluation in Kissimmee

ZIP codes
34741347433474434746347473475834759

Evaluation and CPSC-recognized repair options for 1965–1973 aluminum branch wiring.

About this service in Kissimmee

Some homes built or modified between 1965 and 1973 have aluminum branch-circuit wiring. If an inspector or insurer flagged it, or you’re not sure, we’ll connect you with an independent electrical contractor who can evaluate it and explain the options.

Most Kissimmee homes were built well after 1973, so aluminum branch wiring is unlikely in the newer subdivisions. It’s worth checking in homes built, or added onto, between 1965 and 1973, mostly in the older parts of town. If a 4-point inspector noted ‘single-strand aluminum’, ask your insurer which repairs they accept before getting an estimate, since some accept COPALUM or AlumiConn repairs and others require rewiring.

Permits

In Kissimmee city limits, permits go through City of Kissimmee Permit & Inspection Services. Outside city limits, through Osceola County Permit Center. The contractor normally pulls the permit.

Close-up comparing silver-coloured aluminum and copper household wires
At a glance

Kissimmee

County
Osceola County
ZIP codes
34741347433474434746347473475834759
Permits inside city limits
City of Kissimmee Permit & Inspection Services
Permits outside city limits
Osceola County Permit Center

Signs and situations

Which homes may have it

The U.S. Consumer Product Safety Commission says homes built, or circuits added, between 1965 and 1973 may have aluminum wiring. Homes built before 1965 are unlikely to.

Why it matters

CPSC research found aluminum-wired homes far more likely than copper-wired homes to have connections reach fire-hazard conditions. The risk is at the connections.

Service wiring is different

Large aluminum service and feeder conductors are common and acceptable when properly installed. The concern is small branch circuits.

Insurance

Many Florida insurers ask about single-strand aluminum branch wiring on 4-point inspections.

Call about Aluminum Wiring Evaluation

Repair approaches described by the CPSC
ApproachWhat it isCPSC view
Rewire with copperReplace aluminum branch circuitsPermanent repair
COPALUM crimpCopper pigtail crimped with a special toolPermanent repair (CPSC-recommended method)
AlumiConn connectorSet-screw connector for copper pigtailsAcceptable alternative
CO/ALR devicesAluminum-rated outlets and switchesIncomplete repair at best

Before you hire

  • Ask for the Florida license number and check it on the DBPR license search
  • Ask whether a permit is needed and get the permit number
  • Get the estimate in writing, including what's not included
  • Make sure the final inspection passes and the permit is closed

Frequently asked questions

Look at cable jackets visible in the attic, the garage or near the panel for ‘AL’ or ‘ALUMINUM’. The bare wire may look silver rather than copper colored. Homes built, or circuits added, between 1965 and 1973 are the main candidates. Don’t remove outlet covers or handle wiring yourself: an electrician can confirm it safely, and an insurance inspector may already have noted it on a 4-point report.

Still have a question? Call (844) 578-0475

Call for electrical help

ZIP codes
34741347433474434746347473475834759
Call (844) 578-0475