Skip to content
Apopka · Orange County
Home EV Charger Installation

Home EV Charger Installation in Apopka

ZIP codes
3270332712

Level 2 chargers, 240-volt circuits and load checks for garages and driveways.

About this service in Apopka

Level 2 charger installation in garages and driveways, new 240-volt circuits, load calculations and panel upgrades when needed. Tell us about your car, charger and panel and we’ll connect you with an independent electrical contractor.

Many Apopka homes have detached garages or carports, so a charger may need a longer circuit or a subpanel at the outbuilding. Newer subdivision homes usually have attached garages close to the panel. If you charge at a detached garage that also powers tools, ask for a load calculation for that subpanel, not just the main panel.

Permits

In Apopka city limits, permits go through City of Apopka building department. Outside city limits, through Orange County Division of Building Safety (Fast Track Online). The contractor normally pulls the permit.

Wall-mounted Level 2 EV charger in a residential garage
EV charging pedestal next to a home driveway
At a glance

Apopka

County
Orange County
ZIP codes
3270332712
Permits inside city limits
City of Apopka building department
Permits outside city limits
Orange County Division of Building Safety (Fast Track Online)

Signs and situations

Level 2 charging

A 240-volt circuit charges most EVs overnight. The circuit is sized to the charger and the car.

Load calculation

The electrician checks whether your panel has room for the charger, or whether load management or an upgrade is needed.

Placement

Garage wall or driveway pedestal, cable reach, and an outdoor-rated unit for exposed locations.

HOA and permits

Exterior installs may need HOA approval, and charger circuits need an electrical permit.

Call about Home EV Charger Installation

Level 1 vs Level 2
Level 1Level 2
Voltage120 V household outlet240 V dedicated circuit
Typical useShort daily drivingMost daily driving, full charge overnight
InstallationUsually noneNew circuit, permit, possible panel work

Before you hire

  • Ask for the Florida license number and check it on the DBPR license search
  • Ask whether a permit is needed and get the permit number
  • Get the estimate in writing, including what's not included
  • Make sure the final inspection passes and the permit is closed

Frequently asked questions

Yes for a Level 2 charger. Installing a new 240-volt circuit is electrical work that requires a permit from your local permit office. The electrician checks the panel, sizes the circuit and breaker to the charger, pulls the permit and schedules the inspection. A Level 1 charger that plugs into an existing 120-volt outlet needs no installation, but the outlet should be in good condition and not shared with other heavy loads.

Still have a question? Call (844) 578-0475

Call for electrical help

ZIP codes
3270332712
Call (844) 578-0475